spraygunindustry.com

 SPECIAL PRICED PRODUCT PAGES!
M30 / M45 - Motorguard 1/4" Fitting .01 Filter
Top Professional Spray Guns

 


M30


M45 (M30 w/ Filters)

Fitting 1/2" go into the top of the unit and unit hangs.

The M30 the 1/4" fitting go into the bottom of the unit and unit must be mounted.

 

MotorGuard - M30 - 1/4" .01 Micron Final Filter
24-48 hour delivery to most of the US.
Your Cost ON SPECIAL!

M45 Kit Comes with 1 M30 & 2 Spare Filters

See also MotorGuard M60 for 1/2" Fitting


• The key to MotorGuard's efficiency is based on compressing the element axially and forcing it to expand radially against the tapered walls of the housing. This forces the air to pass between the tightly compressed layers along the length of the element, creating a true depth filter Vs. the conventional method of passing the air through layers of media.
• Using this unique method of filtration creates a labyrinth of sub-micronic openings from the interlocking fibers on the fabric surfaces, entrapping particles as small as .01 microns.

All this incredible filtration is accomplished while at the same time the patented compression technique maintains an optimum filter density, providing maximum efficiency with a minimum pressure drop at the optimum flow rate.

It is best to use a 1st stage filter before this final stage filter to trap the really coarse materials.


Model No. M-30
Pipe Size Max Flow 1/4" NPT
@ 80psi Maximum 45CFM
Pressure Removal 125 psi
Rating (NOM.) .01 Microns
Size Replacement Element 5"x7" M723


M30 / M45 - Motorguard 1/4" Fitting .01 Filter

 



 
SprayGunIndustry