Stainless Steel Pickup Tube
Teflon coated inside
Single regulator (Duel regulated available add $45.00)
Safety relief valve
Handle
Lightweight
Screw type top
OPERATION:
Connect hose as shown in diagram.
Fill cup with strained fluid mixed in accordance with
manufacturer's recommendations on label of container.
Fasten cover securely.
Set air pressure at oil and water extractor (transformer) to
between 35 and 80 P.S.I., depending upon atomization
desired.
Set regulator on pressure cup to approximately
5 P.S.I. for enamels3 P.S.I. for lacquers.
(Turn knob clockwise to increase pressure:
to reduce pressure, turn knob counter-clockwise. Always
release air in cup by momentarily opening air release
valve on cover when attempting to reduce pressure)
Open air adjusting valve.
With trigger fully pulled back, make several fast spray
strokes against a flat surface. After adjustment of pressure,
proper atomization will be indicated by an even distribution
of finely divided paint particles.
