Get the finest finishes on the market. A brush, a spray can may be easy to use, but are not designed to create the fine finish expected by today's consumers. When finish quality counts, visit us at SprayGunWorld.com or SprayGunIndustry.com
There are over 60 factories in China that produce knock off spray guns. They all look shinny and nice in the box. Some are decent, but most are not. They are made of inferior metals and parts that don't hold up to strong corrosive solvents. And while, they may look alike and pretty to the eye, once you start using them, your frustration and will soon follow. Our motto, life to too short to use a crappy spray gun.
*Why are good guns more expensive? Manufacturing tolerances are very high for spray guns. They are under extreme pressure some up to 60 pounds. They have many moving parts prone to wear. They take much abuse even in normal operations. In addition, spray guns have many tiny holes that have to be drilled to perfection at pre defined angles. All holes must match and converge on the small stream of liquid coming out of the gun head. This is not an easy task. On a poorly made gun wear and tear can through off your fan pattern. In contrast, at SprayGunWorld and SprayGunIndustry, some guns we sell have lifetime warranties and gun metal hardened stainless steel parts.
At SprayGunWorld & SprayGunIndustry
|
No problem, please contact us.
• We have a help section at SprayGunIndustry to help you get started. tools & help sections
• We love answering emails from our customers: professorspray@spraygunworld.com
• We have GAURANTEED setups, Don't take a chance with your boss. With our help your setup is guaranteed to work with your material. Get started at our SprayGunWizard.
• We have industry specific recommendations. This section is constantly improving as we talk to hundreds upon hundreds of customers every week in every industry from fishing rods to U.S Air force fighter jets and everything in between.
• Please call the PROFESSOR x 203 as his job is to do your job and get you setup and working. (the professor handles many calls and sometimes calls don't get through. Please call back if you don't get a response quick enough) |
To Get Started we recommend you make a couple of decisions.
Just a few suggestions for Gravity Feed HVLP Spray Guns (for Pressure feed size subtract approx .4mm). For more detailed selections please look at your industry specific section:
Automotive 1.3mm base / 1.4mm clear / 1.7mm prime
Wood 1.2mm stain
/ 1.5mm-1.6mm wood thin / 1.7mm-1.8mm wood thicker / 2.2mm latex
Aircraft - 1.4mm-1.6mm
Boat - 1.4mm-1.6mm / Gel 2.2mm-2.8mm
Metal Coatings - 1.4mm
Industrial paint 1.6mm-1.8mm
Glue 1.4mm thin laminates / 1.8mm -2.2mm thick |
Yes, there are many other considerations, but the above gets you started
. For example - Glue: You have to be concerned about the type of glue you are using. Whether you want a true glue gun or simply a gun that can be used for adhesives. What type of build you are looking for, coverage, speed, etc. Call or email us and we can help.
Please visit the Help section at spraygunworld.com learn about myths and lies of CFM and HP ratings. Your 5HP motor maybe a "fake"!
Always keep a clean gun - Do not leave your gun unattended with paint in it!
TP 's Deluxe Cleaning Kit
Tell friends about us
Thank you
