go back

Spraygunindustry.com

  YOUR 1 STOP SHOP FOR PAINT GUNS AND SUPPLIES!
Top Professional Spray Guns

Go to Air Filters Help Page
$10+
$30+
$50
$90+
YOU ARE HERE
$300+
$695+
$900+
CLICK ON A PRICE RANGE ABOVE 1-8

2 STAGE FINE FILTER UNITS .01 Microns
  Two Stage Filters provide a Professional Level of air filtering at a low price point. Great for Smaller Shops and Those looking for professional quality at an entry level price.  

CATechnology 52-521 (Best Bargain) .01 micron
One of our favorite filters. Most effective professional low cost product on the market. High contamination cleaning 60 CFM .01 micron filtration at a tremendous price. Long lasting filter elements last 6 months. - 1/2" Ports no regulators

Replacement Cartridge 52-552 (1st stage) / 52-553 (2nd stage)

CATechnology 52-522 (Best Bargain) .01 micron
Same as above but with 1 diaphragm regulator and 2nd 1/4" ball valve for main line continuation for connection to another air tool.
CATechnology 52-523 2 gun operation (Recommended) .01 micron
Same as above but with 2 diaghram regulators for 2 spray gun operation, plus 3 1/4" ball valves. 2 sprayg guns plus 3rd ball valve for main line continuation for connection to another air tool.

DeVilbiss HAF 518 .01 micron
55CFM Maintenance-free operations – feature automatic bowl drain. .01 Micron Filtration

 

German Spray Guns 92254 (01/414) .01 micron
.01 Micron Filtration Very high air flow3,600 Nl/min at 6 bars (130cfm at 90psi) Low Maintenance Bronze Filter for extra long life use - Diaphram regulator
*Make your own professional 2 stage unit and save!*
(Please note proper fittings or hoses available at your local hardware or paint store may be needed to fit units together)
STEP 1
Down to 5 Microns
STEP 1 CHOOSE A FIRST STAGE FILTER  
Less Expensive

Astro Pneumatic 2614
Basic Filter Unit Reusable Filter Element

Easy Install

 

Astro Pneumatic 2615
Basic Filter Unit with Regulator and Gauge
ATD 7801
Basic Filter Unit
Reusable Filter Element 1/4" Fitting
ATD 7804
Basic Filter Unit with Diagrpgm Regulator - no guage. Reusable Filter Element 1/4" Fitting
More Expensive

Sharpe 6710 (Recommended)
Larger Unit than 8130 provides greater air flow and more water dirt and oil holding capacity 1/2" inlet 2-3/8" outlets 120 CFM

Shape 6950 (Recommended)
75CFM Unit 5 micron filtration plus large diaphragm regulator with 160 psi inverted gauge and air chock/shut-off Additional regulated outlet (no air chock) Air inlet1/2" F.P.T. Reusable Filter Elements lowers operational costs. Regulator 50CFM
Shape 6720 (Recommended)
Larger Unit than 6950 above 120 CFM Unit 5 micron filtration plus large diaphragm regulator with 160 psi inverted gauge and air chock/shut-off. Additional regulated outlet (no air chock) Air inlet1/2" F.P.T. Reusable Filter Elements lowers operational costs. Regulator 50CFM Max
DeVilbiss HAR602 Finishline (Recommended)
120 CFM DeVilbiss Filter featuring Quick "no tools" filter changess. 5 Micron filtration. 1/2" inlet 1/4" outlet 50CFM Diagrpamg regulator

DeVilbiss 130041
100CFM DeVilbiss Filter featuring Flex Quick Drain to remove water from the unit. 5 Micron filtration.

 

DeVilbiss 130042
100CFM DeVilbiss Filter featuring Flex Quick Drain to remove water from the unit. 5 Micron filtration. 60CFM Diagrpamg regulator
STEP 2
Down to .01 Microns
STEP 2 CHOOSE A FINAL STAGE FILTER  

Motorgaurd M30 & M45 (Recommended)
One of our favorite filters. Nowhere else can you get .01 micron filtration for such a low price. Common known as a "toilet paper" filter - (i.e. because people cheat and put a toilet paper roll inside the filter instead of purchasing replaceable filter packs), these 2nd filter units provide tremendous air protection at the lowest costs in the industry.

We recommend these units as a 2nd filter after a watertrap or primary 5-40 micron filter such as the Astro or Shapre filters in the $30 Category or 1-5 micron filters in the $90 Category. You may use the Motorgaurd filter as your only primary filter system however, please be aware that your filter life will be lessened due to large particles getting filtered in the unit. Under normal circumstances, we recommend filter changes about once every month and a half of heavy use.

Wall bracket included 1/4" Inlet and Outlet fittings 45CFM @ 90PSI

 

Motorgaurd M60 & M100
Larger 1/2" fittings provide greater airflow - 100CFM @90 PSI

Hanging Unit (no brackets) top 1/2" Inlet and Outlet fittings.

 


 



 
SprayGunIndustry