STAGE 1
5 Micron
DeVilbiss
120 CFM Air Line Control Unit
part # DEV-HAR602 |
• With 50 CFM regulator
• 5 micron particle filter
• 120 CFM filter capacity– 50 CFM regulator capacity
• Additional filtered regulated outlet
• Air inlet1/2” N.P.T. (F)
• Air outlet at shutoff valve1/4” NPSM (M)
• Maximum pressure150 psi
|
|
STAGE 2
.01 Micron
Motor Guard
1/4” NPT Sub-Micronic Compressed Air Filter
part #MOT-M45* |
• Eliminates paint failures caused by particulate, moisture and oil aerosol contaminates as small as .01 micron
• Extends the life of your tools by protecting bearings and precision parts from dirty, oily, watery contaminants
• Increases the efficiency and tip life of your plasma cutter by removing moisture and oil aerosols from your compressed air line
• Pipe size 1/4 NPT
• Maximum flow @ 80 PSI45 CFM
• Maximum pressure125 PSI
• Removal rating(nom.).01 micron
• Size5” x 7”
• Replacement elementM-723
|
|
• Contains an M-30 with two spare M-723 elements
* (HI and AK is M30 only)
• Users report contaminant free air with higher flow rates and minimal pressure drops
|
|
STAGE 3
Humidity Water Eliminator
Color Changing Dessicant Filter
part #Mini Dessicant |
• Contains 2 charges special desiccant and has a unique design that ensures maximum compressed air to desiccant contact time
• Color change indicator
Removes all traces of water vapor, oil-aerosols and dirt.
For all stages of painting including the critical application of clear-coats.
• 2 Dessicant Unit Refill for longer life
|
|
